کامپکت چیلر

Condenser Chillers

AIC series chillers are designed to connect to a closed circuit and most of its application is the cooling of the water condensers that are used in temperature testing, humidity, And thermal shock testing chambers.

This kind of chiller is also used to cooling coil, exchanger or any other closed cycle.

The operating temperatures of these chillers range from 12 to 25 degrees Celsius and are equipped with two pumps.

This series of Aryasarmayesh is designed for outdoor installation, And in cool seasons, with arrangements designed for specific modes, it can continue to operate without problems and meet the user’s needs.

This series of chillers has a fluid reservoir heater & a Carter compressor heater, the fluid is composed of 20% ethylene glycol and 80% distilled water, which in addition to tolerating the negative temperature of sedimentation will also be prevented.

All fittings and reservoir are made of stainless steel and bronze and polypropylene pipes that will never be corroded.
Specific features
  • Outdoor installation
  • Ability to work at an ambient temperature of -50 to +50  ° C
  • Beautiful design and accessibility to all parts of the chiller
  • Fast after-sale service
  • Warranty 24 months or 1000 operating hours
  • Equipped with two independent pumps
  • Equipped with external control panel
  • Equipped with anti-freeze
  • Equipped with an environmental sensor
  • Equipped with fluid reservoir heater
  • Equipped with Compressor Carter Heater 
Standard Equipment
  • Equipped with two pumps with a pressure of  ۱ to 3 bar
  • Brazed heat exchanger
  • Antifreeze thermostat
  • Teflon bases
  • Rotameter
  • Sensor and display of ambient and reservoir temperature 
  • The fluid reservoir is filled with 20% ethylene glycol and 80% distilled water
  • Free piping in two lines from the chiller to the consumer to a distance of 15 meters from the polypropylene
  • HMI 4.3 in colored & PLC
  • Hydrostat for pump
  • ۴ valves on the fluid reservoir for servicing pumps
  • ۲ valves mounted on the chiller for the direction of flow and return of the fluid
  • Equipped with drain valve
  • Equipped with an external panel for controlling the chiller from the inside of the laboratory by the operator
  • Equipped with a 16 pin socket  on the body to connect to the external panel
  • High and low pressure control gas
  • Smart fan control
Options
  • Analog Flow Meters
  • Analog Pressure transmitter
  • High pressure pump (3 to 10) bar
  • Design and construction as per customer’s order
  • Inverter
  • Software connection with computer and laptopd and gas routes 
Software functionality
  • Run in two ways: PID and ON/OFF
  • Draw graph and storage on flash memory
  • Data logger and storage on flash memory
  • Display the errors occurring in the chiller and save the error table
  • Determine user access level by admin
  • Correction of sensor error in nonlinear (calibration)
  • Monitoring
  • Two languages Farsi/English 
  • Equipped with automatic control system for cold seasons to prevent freezing of pipe paths and intelligent heat exchanger compressor card